Fike FCP

Addressable Fire Control Panel

Fike’s newest family of control panels offers you complete flexibility of early warning fire detection, voice  evacuation and building process management functions. FCP supports up to 2100 devices, including the latest fire detection technologies such as air sampling, flame detection and linear heat, and offers networkability for up to 32 FCP panels.

FCP-75

FCP-75

Max IDP Devices

75 detectors | 75 module

Voice Evacuation

No

Power Supply

2.5A

NACs

2

SBUBSs

1

Datasheet

FCP-300

FCP-300

Max IDP Devices

300 Mixed

Voice Evacuation

No

Power Supply

6A

NACs

4

SBUBSs

1

Datasheet

FCP-300ECS

FCP-300ECS

Max IDP Devices

300 Mixed

Voice Evacuation

Yes

Power Supply

6A

NACs

4

SBUBSs

1

Datasheet

FCP-2100

FCP-2100

Max IDP Devices

2100 Mixed

Voice Evacuation

No

Power Supply

9A

NACs

8 (Flexput)

SBUBSs

2

Datasheet

FCP-2100ECS

FCP-2100ECS

Max IDP Devices

2100 Mixed

Voice Evacuation

Yes

Power Supply

9A

NACs

8 (Flexput)

SBUBSs

2

Datasheet

FCP Features

Voice Evacuation

Building occupants receive clear and concise audible messages about the nature of the hazard, their proximity to it and instructions to safely evacuate the building.

Addressable

Each IDP detector’s specific position and status is monitored by the fire panel, allowing safety personnel to immediately locate the fire. Other benefits include the ability to easily replace a detector via dip switches (no computer required) and monitor event history.

Configuration

Fike FCP downloads its complete configuration of the fire system in just minutes rather than hours, allowing your application to be protected as quickly as possible.

Upgrade Program

If you are interested in replacing a fire panel such as a Fike Cybercat with Fike FCP, contact a Fike representative today to discuss our upgrade program.

Fike Cheetah® Xi

Addressable Releasing Panel

Do you have critical assets that must be protected at all costs? Offering networkability of up to 128 panels, Cheetah Xi is compatible with all of Fike’s fire suppression systems, including chemical agents, water mist, inert gas and CO2 – ensuring the most effective solution is available to meet your unique challenges and business needs.

Cheetah Xi 50

Cheetah Xi 50

Max Eclipse Devices

50

Conventional SLC Points

1

Voice Evacuation

No

Power Supply

5.25A

Datasheet

Cheetah Xi 1016

Cheetah Xi 1016

Max Eclipse Devices

1016

Conventional SLC Points

2, expandable to 4

Voice Evacuation

No

Power Supply

6A, expandable to 12A

Datasheet

Cheetah Xi 1016

Cheetah Xi 1016

Max Eclipse Devices

1016

Conventional SLC Points

2, expandable to 4

Voice Evacuation

No

Power Supply

6A, expandable to 12A

Datasheet

Fike SHP-PRO®

Conventional Single-Hazard Releasing Panel

If you have a small room or a limited number of critical assets requiring reliable fire protection, SHP-PRO is Fike’s most cost-effective and easy-to-install releasing panel. SHP-PRO® is often used in conjunction with a building’s primary fire alarm system to provide quick and reliable fire suppression using any of Fike’s agents.

SHP

SHP-PRO

Max Eclipse Devices

25 per detection circuit

Conventional Detection Circuit

2

Voice Evacuation

No

Power Supply

4A

Class B Input Circuits

3

Datasheet

CIE-A-400

The CIE-A-400 Addressable Fire Alarm Control Panel is a two-loop panel capable of each loop supporting up to 200 devices* with a maximum loop length of 2 km. The panel also provides two configurable Monitored Input Circuits, 2 configurable Monitored Output Circuits, 2 configurable Relays, 1 Fault Relay and also a Peripheral Bus Circuit to add up to 8 Repeater Panels.

  • One or Two Loop
  • Loop length up to 2 km long
  • Loop capacity up to 200 devices
  • 32 fire zones and 32 I/O zones
  • Alarm confirmation verification feature
  • 1000 event history buffer
  • Soft addressing
  • 2 monitored inputs
  • 2 monitored outputs
  • 3 relays
  • Up to 8 repeaters
  • 7 Ah max battery capacity

Access Product Documents

540-0001 Group B G U -2

CIE-A-200

The CIE-A-200 Addressable Fire Alarm Control Panel is a one loop panel capable of supporting up to 200 devices* with a maximum loop length of 2KM, the panel also provides two configurable monitored input circuits, 2 configurable monitored output circuits, 2 configurable + 1 fault relay and also a Peripheral bus circuit to add up to 8 repeater panels.

  • One Loop
  • Loop length up to 2 km long
  • Loop capacity up to 200 devices
  • 32 fire zones and 32 I/O zones
  • Alarm confirmation verification feature
  • 1000 event history buffer
  • Soft addressing
  • 2 monitored inputs
  • 2 monitored outputs
  • 3 relays
  • Up to 8 repeaters
  • 7 Ah max battery capacity

Access Product Documents

CIE-A-200 Front

TwinflexPro2

Conventional Two-Wire Fire Control Panel

Because of its versatility, ease of installation and cost effectiveness, the TwinflexPro2 two-wire fire alarm is often the natural choice for smaller applications. The LPCB-approved fire alarm system incorporates Fike’s Twinflex Multipoint ASD, combining smoke and heat detection with an optional built-in sounder, allowing the entire system to be installed using just one pair of wires per zone.

  • Differentiates between call point or smoke and heat alarms
  • 4 line x 20 character LCD display
  • Event log storing up to 500 events
  • Alarm confirmation verification feature for BS5839 Pt 6 applications
  • Available in 2, 4 and 8 zone panel versions
  • Up to 32 devices per zone
  • 3 enhanced test modes
  • No separate End Of Line (EOL) device required
  • Two-wire I/O module available for interfacing other types of detection

Access Product Documents »

Twinflex Pro 2

Fike Voice Evacuation

Imagine being on the seventh floor of a building and the fire alarm activates. The only instructions you hear are horns and see are strobe lights, causing mass confusion among you and other occupants. 

Fike Voice Evacuation, integrated with Fike FCP ECS models, provides customized pre-recorded messages for nearly any situation: fire, tornado, building lockdown and more, to ensure occupants know how to respond in any emergency situation regardless of their location in the building.

Fike Fire Voice Evacuation

FCP Models With Voice Evacuation

FCP-300ECS

FCP-300ECS

Amplifiers

8

Total Amplifier Power

1kW

Speaker Circuits

64

Mapped Audio Switches

40

Recordable Messages

15

Datasheet

FCP-300ECS

FCP-2100ECS

Amplifiers

16

Total Amplifier Power

2kW

Speaker Circuits

128

Mapped Audio Switches

64

Recordable Messages

15

Datasheet

Ready To Learn More?

How Fire Control Panels Work

How do fire control panels work?

1. Fire Detected

A detector identifies the fire and notifies the fire control panel. Very early warning detectors such as air sampling, flame detectors and video analytics are ideal for certain applications to ensure the fire is detected in its incipient stages.

4. Suppression Flows

If applicable, a releasing panel will activate relays to dispense pre-action sprinkler systems or special hazard suppression such as a chemical agent or water mist onto the protected space. This function may be performed by the building’s primary fire control panel (Cheetah Xi) or by releasing panels connected to it (SHP-PRO).

2. Alarm Activates

The fire control panel goes into alarm, activating horns and strobes or pre-programmed voice evacuation functions to quickly evacuate building occupants. It may also notify nearby occupants of the impending release of suppression systems.

5. Fire Located By Fire Personnel

When fire personnel arrive, they may locate an addressable remote display near the entrance, which will clearly display the location of the hazard based on the detector’s address in the system.

3. Building Relays Activate

If the fire panel is integrated with building management systems, it may recall elevators to the first floor, unlock doors and activate ventilation systems.

What is the difference between addressable and conventional fire control panels?

It’s recommended that any fire control panel equipped with 10 detectors or more is an addressable panel. But why?

Addressable fire detection systems give each detector a specific address, allowing full visibility of the detector’s status and precise accuracy for the location of a hazard.

A few instances where addressable fire protection systems include:

targeted suppression release

The delivery of fire suppression systems to specific locations, rather than an entire floor where it’s not necessary and will damage areas not affected by the fire.

custom evacuation message

Specific voice evacuation messages may be customized based on the detector’s location to ensure the correct instructions are communicated to increase the speed of evacuation and decrease confusion among occupants.

evacuation plan

Allows building management or safety personnel to quickly identify the location of the fire, ensuring building occupants have safely evacuated and the fire is controlled as quickly as possible.

Conventional fire alarm systems do not allow for this level of functionality, which is why they are not recommended in buildings with a significant number of occupants or critical assets which must be protected.

Speak With An Expert